10KWH Power Wall LiFePO4 Battery Pack for Home Energy Storage System
Lithium-Iron Phosphate, or LiFePO4 Deep-Cycle batteries provide a alternative solution to demanding applications that require a lighter weight, longer life, and higher capacity battery, no matter for common power supply or solar energy system. Features include advanced battery management systems (BMS) and active intelligent monitoring.
Wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system.
Suitable applications include:
- Common Power Supply
- Solar Energy Storage
- Communication System
- Telecom Site
FEATURES & BENEFITS
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
|Nominal Voltage||51.2 V|
|Nominal Capacity||200 Ah|
|Capacity @ 20A||600 min|
|Resistance||≤45 mΩ @ 50% SOC|
|Module Parallel||Up to 3 packs|
|Recommended Charge Current||20A|
|Maximum Charge Current||100A|
|Recommended Charge Voltage||57.6V|
|BMS Charge Cut-Off Voltage||<58.4 V (3.65V/Cell)|
|Reconnect Voltage||>57.6 V (3.6V/Cell)|
|Balancing Voltage||<57.6 V (3.6V/Cell)|
|Maximum Batteries in Series||15|
|Maximum Continuous Discharge Current||100 A|
|Peak Discharge Current||110 A (3s)|
|BMS Discharge Cut-Off Current||150 A (300ms)|
|Balancing open voltage||55.2 V (3.45V/Cell)|
|Recommended Low Voltage Disconnect||44 V (2.75V/Cell)|
|BMS Discharge Cut-Off Voltage||>32.0V (2s) (2.0V/Cell)|
|Reconnect Voltage||>40.0 V (2.5V/Cell)|
|Short Circuit Protection||250 ~ 500 μs|
|Dimension (L x W x H)||580 x 420 x 230 mm|
21.7 x 16.5 x 9.05″
|Approx. Weight||37.2 lbs (82 kg)|
|Terminal Type||DIN POST|
|Terminal Torque||80 ~ 100 in-lbs (9 ~ 11 N-m)|
HEATING FOIL PERFORMANCE
|Discharge Temperature||-4 ~ 131 ºF (-20 ~ 55 ºC)|
|Charge Temperature||-4 ~ 113 ºF (0 ~ 45 ºC)|
|Storage Temperature||23 ~ 95 ºF (-5 ~ 35 ºC)|
|BMS High Temperature Cut-Off||149 ºF (65 ºC)|
|Reconnect Temperature||131 ºF (55 ºC)|
|Heating Temperature Range||-4 to 41 ºF (-20 to 5 ºC)|
|Heating Time||Approximately 1 hour @ 7.5 A|
|BMS Heating Foil Cut-Off||158 ºF (70 ºC)|
WeBright Solar can customize your own complete solar power system and PV solution kit based on your requests. We provide grid-tie,off-grid, hybrid PV system solutions.
If you are an end users , we can offer more detail information to you. So that you can get the satisfied solar power system solutions for your home, offices or factory solar system plant .
Please, if you have any questions or concerns about shipping time and delivery, contact us prior on leaving a negative feedback as we are dedicated to provide you with the best buying experience.You can ask our professional products consultant.
Tel: + 86 18312565127