- Home
- About
- Lithium-ion Batt
- Products
- Projects
- News
- Contact US
- Login
- Newsletter
Lithium-Iron Phosphate, or LiFePO4 Deep-Cycle batteries provide a alternative solution to demanding applications that require a lighter weight, longer life, and higher capacity battery, no matter for common power supply or solar energy system. Features include advanced battery management systems (BMS) and active intelligent monitoring.
19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability.
Suitable applications include:
Â
High cycle life
4000 cycles @80% DOD for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
CAUTIONS
•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
Nominal Voltage | 48 V |
Nominal Capacity | 200Â Ah |
Capacity @ 20A | 600 min |
Energy | 9600Â Wh |
Communication | CAN2.0/RS232/RS485 |
Resistance | ≤45 mΩ @ 50% SOC |
Efficiency | >96% |
Module Parallel | Up to 8 packs |
DISCHARGE PERFORMANCE
Recommended Charge Current | 20A |
Maximum Charge Current | 100A |
Recommended Charge Voltage | 54V |
BMS Charge Cut-Off Voltage | <54.7 V (3.65V/Cell) |
Reconnect Voltage | >54 V (3.6V/Cell) |
Balancing Voltage | <54 V (3.6V/Cell) |
Maximum Batteries in Series | 15Â |
CHARGE PERFORMANCE
Maximum Continuous Discharge Current | 100Â A |
Peak Discharge Current | 110 A (3s) |
BMS Discharge Cut-Off Current | 150 A (300ms) |
Balancing open voltage | 51.7 V (3.45V/Cell) |
Recommended Low Voltage Disconnect | 41.2 V (2.75V/Cell) |
BMS Discharge Cut-Off Voltage | >30.0V (2s) (2.0V/Cell) |
Reconnect Voltage | >37.5 V (2.5V/Cell) |
Short Circuit Protection | 250 ~ 500 ÎĽs |
Dimension (L x W x H) | 482 x 500 x 222 mm 19.0 x 19.7 x 8.7″ |
Approx. Weight | 35.7 lbs (80 kg) |
Terminal Type | DIN POST |
Terminal Torque | 80 ~ 100 in-lbs (9 ~ 11 N-m) |
Case Material | SPPC |
Enclosure Protection | IP54 |
Discharge Temperature | -4 ~ 131 ÂşF (-20 ~ 55 ÂşC) |
Charge Temperature | -4 ~ 113 ÂşF (0Â ~ 45 ÂşC) |
Storage Temperature | 23 ~ 95 ÂşF (-5 ~ 35 ÂşC) |
BMS High Temperature Cut-Off | 149 ÂşF (65 ÂşC) |
Reconnect Temperature | 131 ÂşF (55 ÂşC) |
Heating Temperature Range | -4 to 41 ÂşF (-20 to 5 ÂşC) |
Heating Time | Approximately 1 hour @ 7.5 A |
BMS Heating Foil Cut-Off | 158 ÂşF (70 ÂşC) |
Instant Contact:Â
WeBright Solar can customize your own complete solar power system and PV solution kit based on your requests. We provide grid-tie,off-grid, hybrid PV system solutions.
If you are an end users , we can offer more detail information to you. So that you can get the satisfied solar power system solutions for your home, offices or factory solar system plant .Â
Please, if you have any questions or concerns about shipping time and delivery, contact us prior on leaving a negative feedback as we are dedicated to provide you with the best buying experience.You can ask our professional products consultant.
Tel: + 86 18312565127Â Â
E: info@webrightsolar.com Â
Whatsapp: 00861831256512